Administrators Jannza Posted June 4, 2009 Administrators Report Share Posted June 4, 2009 Does anyone know which way round these shims should go to make these fit my 26mm handlebar? I have checked and it needs both but the instructions do not mention which way round. [/img] Quote Link to comment Share on other sites More sharing options...
paul mcskimming Posted June 6, 2009 Report Share Posted June 6, 2009 you use 2 shims per bar clamp in order to reduce from 31.8 down to 26mm. on the inside of each of the clamps there is a small locating hole for the shms. on each of the shims there is a small protrusion which fits into said holes being an octopus also helps when attemting to hold shims in place and clamp onto to the handlebars. have fun cheers jed clampit Quote Link to comment Share on other sites More sharing options...
paul mcskimming Posted June 6, 2009 Report Share Posted June 6, 2009 ps..i'm sure those minature binocular shaped thingy's are spacers for underneath the arm rests. cant remember if they supply 2 sets of spacers of differing heights. you would then fit the ones that suit your position/style. cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.