Colin McPhee Posted October 27, 2015 Report Share Posted October 27, 2015 Hi the bolts which hold the speedplay base plate to my winter shoes have rusted inside the screw housing and I was wondering if anyone out there has had any experience of removing the bolts. I've heard that drilling may be the answer but it sounds a bit too hazardous ! Cheers Quote Link to comment Share on other sites More sharing options...
2023 Subscriptions Tom Hill Posted October 27, 2015 2023 Subscriptions Report Share Posted October 27, 2015 Hi Colin Spray/soak in WD40. Then try to tighten first! This usually breaks the "seal" and you should be able to remove them. Make sure you have a good quality screwdriver bit of the correct size so that you don't ruin the screw head. Colin McPhee 1 Quote Link to comment Share on other sites More sharing options...
Colin McPhee Posted October 27, 2015 Author Report Share Posted October 27, 2015 Ok cheers Tom Iain Cowden 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.