2023 Subscriptions ginty001 Posted February 6, 2016 2023 Subscriptions Report Share Posted February 6, 2016 My new TT frameset needs the carbon steerer to be cut and the wee star thingy installed in it. Is this something i should be doing myself, or a task better left to to the LBS? Any advice welcome? Cheers Ian Quote Link to comment Share on other sites More sharing options...
Big Al Posted February 6, 2016 Report Share Posted February 6, 2016 Piece of tape, hacksaw, sandpaper, done Quote Link to comment Share on other sites More sharing options...
alexb Posted February 6, 2016 Report Share Posted February 6, 2016 Agree with Big Al. Easy enough job at home, just make sure you use a fine hacksaw blade. Quote Link to comment Share on other sites More sharing options...
2023 Subscriptions XXX Posted February 6, 2016 2023 Subscriptions Report Share Posted February 6, 2016 If carbon stearer dont fit star they are not used with carbon Measure twice rap tape below cut line cut sand all done Instead of star washer should be a frictions expanded Bung Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.